Chains for Forklifts

Chain for Forklifts - The life of the forklift lift chains could actually be lengthened with correct maintenance and care. Lubricating correctly is an excellent way to be able to lengthen the capability of this forklift part. It is essential to apply oil occasionally with a brush or whichever lube application device. The frequency and volume of oil application should be adequate in order to avoid any rust discoloration of oil within the joints. This reddish brown discoloration generally signals that the lift chains have not been properly lubricated. If this particular situation has happened, it is very imperative to lubricate the lift chains as soon as possible.

It is typical for a few metal to metal contact to take place all through lift chain operation. This can lead to components to wear out in time. The industry standard considers a lift chain to be worn out when 3% elongation has occurred. In order to prevent the scary possibility of a disastrous lift chain failure from occurring, the manufacturer highly suggests that the lift chain be replaced before it reaches three percent elongation. The lift chain gets longer because of progressive joint wear that elongates the chain pitch. This elongation could be measured by placing a certain number of pitches under tension.

One more factor to ensuring correct lift chain maintenance is to check the clevis pins on the lift chain for indications of wear and tear. The lift chains have been put together so that the tapered faces of the clevis pin are lined up. Usually, rotation of the clevis pins is commonly caused by shock loading. Shock loading takes place if the chain is loose and then suddenly a load is applied. This causes the chain to experience a shock as it 'snaps' under the load tension. With no good lubrication, in this particular situation, the pins can rotate in the chain's link. If this particular scenario occurs, the lift chains have to be replaced at once. It is imperative to always replace the lift chains in pairs to be able to ensure even wear.


Click to Download the pdf

Forklift Parts

Parts for Rough Terrain Forklifts

Parts for Rough Terrain Forklift - There are in reality two different classifications of forklifts within the materials handling industry, the industrial model and the rough terrain model. Rough terrain lift trucks initially came on the marketplace in the 1940's and had been predominantly utilized on uneven roads, ideal for areas where no paved roads were accessible, like building sites...

More

---

Remanufactured Lift Truck Parts

Remanufactured Forklift Part - Forklifts are rather pricey pieces of equipment because a new electric forklift model could cost starting from $18,000 to $25,000, for a 5000lb machinery. Furthermore, several thousands of dollars would have to be invested in a battery charger and battery. A similar internal combustion lift truck of similar lift capacity will cost a little less and...

More

---

Parts for LPG Forklift

Parts for LPG Forklifts - Liquefied petroleum is used as a fuel in heating vehicles and appliances. It is a really flammable mixture of hydrocarbon gases, increasingly utilized as an aerosol propellant and refrigerant. Liquefied petroleum gas or LPG, is replacing chlorofluorocarbons as a way to be able to reduce ozone layer damage. Normally known as autogas or auto propane...

More

---

Attachments for Scissor Lifts

Attachments for Scissor Lifts - The scissor lift or table lift, is a mechanical industrial lift that has been customized to be utilized in retail, wholesale, manufacturing and production environments. Industrial scissor lifts have been used primarily within production and manufacturing facilities for many decades to successfully raise and lower materials, people and other equipment. The scissor lift is a...

More

---

Adjustable Booms

Adjustable Booms - An adjustable forklift boom is a really useful part of equipment for businesses that need to rearrange really heavy things around. The forklift itself is a very vital piece of machinery that is basically a small truck equipped along with 2 prongs which are power operated on the front. These prongs could be slid under really heavy...

More

---

Doosan Forklift Part

Doosan Forklift Part - Doosan Infracore Company Ltd. is an international and intercontinental company that features Defense Industry Products, Industrial Vehicles, Diesel Engines, Automation Systems, Machine Tools and Construction Equipment. Their United States partner, Doosan Infracore America Corporation, situated in Suwanee, Georgia houses a 170,000 square foot manufacturing facility, home to a Compact Equipment and Construction division. Cleveland, Stockton houses...

More

---

Clamp Forklift Part

Part for Clamp Forklift - Normally used as forklift attachments in petroleum and chemical industries, the Drum Clamp, are specifically intended for the secure handling of standard 55-gallon drums. These additional parts greatly enhance productivity in view of the fact that they can handle up to 4 drums per load. Drum Clamps can likewise be utilized in the food packaging...

More

---

Bale Clamps

Bale Clamps - Particularly handy for carrying or stacking plenty of goods, bale clamps can be utilized as a hydraulic lift truck or forklift accessory able to carry bales with out a pallet. Bar arm clamps are additional attachments that could be attached to allow the individual operating it to be able to lift cylindrical items such as rolls of...

More

---